You must have javascript enabled to use canopyguide.biz !

Squadron 1/72-scale Republic P-47 Thunderbolt Razorback Replacement Canopy

#9101

USD $10.36

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: N/A This site contains affiliate links for which we may be compensated Toys & Hobbies / Models & Kits / Aircraft

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $

SQUADRON 1/72-SCALE REPUBLIC P-47 THUNDERBOLT RAZORBACK REPLACEMENT CANOPY #9101 SQUADRON 1/72-SCALE REPUBLIC P-47 THUNDERBOLT RAZORBACK REPLACEMENT CANOPY #9101 WW2 USAAF FG BRAND NEW SQUADRON 1/72-SCALE VACU-FORM CRYSTAL CLEAR CANOPIES SUGGESTED KIT: HASEGAWA ----------------------------------------- Additional Information from Internet Encyclopedia The Republic P-47 Thunderbolt was the largest, heaviest, and most expensive fighter aircraft in history to be powered by a single piston engine. It was heavily armed with eight .50-caliber machine guns, four per wing. When fully loaded, the P-47 weighed up to eight tons, and in the fighter-bomber ground-attack roles could carry five-inch rockets or a significant bomb load of 2,500 pounds; it could carry over half the payload of the B-17 bomber on long-range missions (although the B-17 had a far greater range). The P-47, based on the powerful Pratt & Whitney R-2800 Double Wasp engine, was to be very effective as a short-to-medium range escort fighter in high-altitude air-to-air combat and, when unleashed as a fighter-bomber, proved especially adept at ground attack in both the World War II European and Pacific Theaters. The P-47 was one of the main United States Army Air Forces (USAAF) fighters of World War II, and served with other Allied air forces, notably those of France, Britain, and Russia. Mexican and Brazilian squadrons fighting alongside the U.S. were equipped with the P-47. On October 14, 1941, the USAAF (successor to the USAAC) ordered an additional 850 P-47s. Unable to keep up with the demand with their main plant in Farmingdale, New York, Republic built a new plant in Evansville, Indiana. Production of P-47Cs in the new plant were designated P-47D-RA, with the first aircraft rolling off the production line in September 1942. The initial production block was based on the P-47C-2-RE or C-5-RE, but with two additional cowl flaps (for a total of five) on each side (this was absent on early aircraft, making them indistinguishable from P-47Cs). Internal changes included extra cockpit armor and changes to the turbo-supercharger exhaust system. Eventually, these changes would be incorporated into the Farmingdale-built aircraft, these designated P-47D-1-RE. 21 production blocks of the "razorback" P-47D, totaling 9,530 aircraft, would be built by both plants before production switched to the "bubbletop" D-variant. Sub-variants An early P-47D-RA, s/n 42-22281 'Aloe Al', with three cowl flaps per side. This was later changed to five. P-47D-RA, P-47C-2-RE or C-5-RE built at Evansville. Later extra cowl flaps and minor changes were added. 114 built including pre-production aircraft. Sometimes referred to as the P-47D-1-RA. P-47D-1-RE, Farmingdale equivalent of the late-P-47D-RA. 105 built. P-47D-2-RE, with turbo-supercharger shroud removed. 445 built. P-47D-2-RA, Evansville equivalent of the D-2-RE. 200 built. P-47D-3-RA, with minor changes. 100 built. P-47D-4-RA, with a GE C-21 supercharger and water injection. Not quite up to C-5-RE standard. 200 built. P-47D-5-RE, with a GE C-21 supercharger and water injection as well as improved B-7 bomb/drop tank shackles. Later aircraft featured notches in the lower cowl flaps. 300 built. P-47D-6-RE, with minor electrical system changes. 350 built. P-47D-10-RE, with a 2,300 hp R-2800-63 engine and an improved GE C-23 supercharger. Changes were made to the flaps as well as the cooling, oil, and hydraulic systems. 250 built. P-47D-11-RE, with an automatic water injection procedure in place of the manual control of the previous blocks. 400 built. P-47D-11-RA, Evansville equivalent of the D-11-RE. 250 built. P-47D-15-RE, with underwing pylons and a completely jettisonable canopy. 446 built. P-47D-15-RA, Evansville equivalent of the D-15-RE. 157 built. P-47D-16-RE, minor fuel system changes. 254 built. P-47D-16-RA, Evansville equivalent of the D-16-RE. 29 built. P-47D-20-RE, with 2,300 hp R-2800-59 engine, new "universal" wing pylons designed to carry a greater of bombs and drop tanks, and other minor changes. 299 built. P-47D-20-RA, Evansville equivalent of the D-20-RE. 187 built. P-47D-21-RE, changes to water injection button on throttle. 216 built. P-47D-21-RA, Evansville equivalent of the D-21-RE. 224 built. P-47D-22-RE, with a 13' ​1 7⁄8" Hamilton Standard Hydramatic 24E50-65 propeller in place of the original 12' 2" Curtiss Electric unit. 850 built. P-47D-23-RA, Evansville equivalent of the D-22-RE, but with a 13' Curtiss Electric C542S propeller. 889 built. Thunderbolt Mk I, designation of P-47D-22-REs in RAF service. Some aircraft were fitted with Malcolm Hood canopies to improve visibility. P-47G Even with the second plant, Republic was still having trouble keeping up with the ever increasing orders for Thunderbolts. Curtiss-Wright, which recently prepared its Buffalo, New York plant for mass production of its P-60A before their contract was canceled, was awarded another contract to produce the P-47 as the P-47G.[12] The first delivery of a Curtiss-Wright-built P-47G was in December 1942.[12] In all, Curtiss-Wright built 354 P-47Gs in five production blocks before production ended in March 1944. Sub-variants P-47G-CU, identical to the P-47C-RE. 20 built. P-47G-1-CU, identical to the P-47C-1-RE. 40 built. P-47G-5-CU, similar to the P-47D-1-RE but with minor changes. 60 built. P-47G-10-CU, identical to the P-47D-5-RE. 80 built. P-47G-15-CU, identical to the P-47D-10-RE. 154 built TP-47G "Doublebolt", two P-47G-15-CUs were modified on the production line as prototypes for a trainer variant of the P-47. A second cockpit was added in front of the original, taking the place of the main fuselage fuel tank. Nicknamed "Doublebolt", these were the only factory-built two-seat P-47 trainers, though a few P-47Ds are known to have been fitted with a second seat as a field modification. XP-47H In an attempt to improve the performance of the Thunderbolt, Republic began a project to install a 2,300 hp Chrysler XIV-2220-1 16-cylinder inverted-V engine in two P-47D-15-RE airframes in August 1943. The resulting XP-47H had a new streamlined nose with a large intake and was expected to have a maximum speed of 490 mph. While sources do not agree whether the aircraft met the speed expectations or fell short, by the time the aircraft were modified in 1945, the Jet Age was beginning and the USAAF was losing interest in piston-engined fighters, and the XP-47H project was canceled. XP-47J A similar attempt to improve performance resulted in the XP-47J. Unlike the XP-47H, the sole XP-47J was a newly built airframe, with many changes to reduce weight. The aircraft was fitted with a 2,800 hp R-2800-57C engine with a CH-5 supercharger, housed in a redesigned streamlined cowling. Armament was reduced to six M2 Brownings. The XP-47J was first flown on November 26, 1943, and on August 4, 1944, it became the first piston-engined fighter to exceed 500 mph, with a speed of 504 mph, making it the fastest Thunderbolt variant. A production version of the XP-47J was canceled in favor of another Thunderbolt development, the XP-72, as were plans for installing an R-2800-61 engine with contra-rotating propellers. FREE scheduling, supersized images and templates. Get Vendio Sales Manager. Make your listings stand out with FREE Vendio custom templates! FREE scheduling, supersized images and templates. Get Vendio Sales Manager. Over 100,000,000 served. Get FREE counters from Vendio today!

Returns Accepted for this item if it's within 30 Days

SQUADRON 1/72-SCALE REPUBLIC P-47 THUNDERBOLT RAZORBACK REPLACEMENT CANOPY #9101
See more
Price type
IN STOCK OUT STOCK